Skip to main content

IAMGOLD Announces Initial Drilling Results Testing the Underground Mining Potential at Its Saramacca Project, Suriname

Toronto, Ontario--(Newsfile Corp. - August 7, 2019) - IAMGOLD Corporation (TSX: IMG) ("IAMGOLD" or the "Company") today announced results from an exploration drilling program completed on the Saramacca Joint Venture Project (the "Saramacca Project"), located 25 kilometres southwest of its Rosebel operation and 125 kilometres south of Paramaribo, Suriname. The Saramacca Project is a 70:30 joint venture between IAMGOLD's Rosebel Gold Mines N.V. ("RGM") and the Government of Suriname.

The Company is reporting assay results from fifteen diamond drill holes totaling 9,843 meters completed to test the main fault corridor as part of its 2018 - 2019 exploration drilling program to evaluate the underground resource potential of the Saramacca deposit. Along with these results, the Company is highlighting assay results from seven diamond drill holes totaling 2,233 metres which were completed as part of previous drilling campaigns to support various technical studies relating to the Saramacca development. These latter drill holes pierce below the current Mineral Reserve design pit and are therefore considered relevant to the evaluation of potential underground mineral resources.

The Company is also reporting results from twelve diamond and reverse circulation drill holes totaling 2,061 meters which intersected near surface mineralization on a secondary mineralized corridor to the northwest along strike of the Saramacca deposit. This area is being considered as a potential location for a portal for underground access.

The assay results are provided in Tables 1 to 3 below and include the following highlights (drill hole longitudinal sections are attached to this news release):

Saramacca Underground Potential:

  • Drill hole SMD-0067: 21.0 metres grading 6.05 g/t Au
                    includes: 10.5 metres grading 9.72 g/t Au
  • Drill hole SMD-0068: 19.5 metres grading 5.62 g/t Au

  • Drill hole SMD-0069: 20.0 metres grading 5.77 g/t Au
                    includes: 4.5 metres grading 10.86 g/t Au
  • Drill hole SMD-0071B: 22.7 metres grading 8.54 g/t Au
                    includes: 9.0 metres grading 15.23 g/t Au
  • Drill hole SMRC-0008: 24.0 metres grading 9.67 g/t Au
                    includes: 6.0 metres grading 26.41 g/t Au

Saramacca Secondary Structure:

  • Drill hole SMRC-0008: 6.0 metres grading 26.41 g/t Au
                                and
    6.0 metres grading 11.46 g/t Au
  • Drill hole SMD-0082: 4.5 metres grading 19.99 g/t Au
  • Drill hole SMD-0090A: 6.0 metres grading 10.19 g/t Au

Craig MacDougall, Senior Vice President, Exploration for IAMGOLD, stated: "The initial results from the drilling program to evaluate the potential for underground resources are very encouraging and justify additional diamond drilling to delineate mineral resources which could be extracted by underground mining methods. The drilling results along strike of the Saramacca deposit also continue to highlight the exploration potential to further expand the mineral resources at and along the Saramacca mineralized trend."

The Saramacca Project (on a 100% basis), based on an open pit mining scenario, hosts estimated Proven and Probable Mineral Reserves totaling 1.5 million ounces of contained gold and Measured and Indicated Mineral Resources (inclusive of Reserves) totaling 1.8 million ounces of contained gold, and Inferred Mineral Resources totaling 0.3 million ounces of contained gold (see news releases dated September 23, 2018 and February 19, 2019). The Saramacca underground mining potential drilling program focused on confirming continuity of mineralization below the current Mineral Reserve design pit and to advance the delineation of potential underground mineral resources which could enhance the future economic upside of the project and the RGM operation. In addition, a secondary mineralization corridor was also discovered approximately 300 meters to the northwest of the design pit, in an area considered favorable for a potential portal installation due to a relatively thin saprolitic profile.

2018 - 2019 Exploration Program

The 2018 - 2019 underground potential exploration drilling program was designed to test whether high grade gold mineralization's intersected within or in the immediate proximity of the current Saramacca pit design extends at depth.

The drilling program has confirmed the presence of a wide corridor of mineralization with approximate dimensions of 200 metres (strike), 15 metres (width) and 200 metres (depth) located below the reserve design pit (see Table 1 & 2). The discovery of a secondary mineralized corridor in an area being considered for the location of a portal also demonstrates the potential for further resource expansion (see Table 3). This secondary zone has been intersected in drilling for 300 meters along strike, over a variable width of 1 to 10 meters (width), extending to a depth of 200 meters (depth), and remains open in all directions.

The main mineralization corridor was targeted using drill hole spacing of approximately 70 metres, although the actual spacing varies from 15 metres to 100 metres (see Figure 1: longitudinal section below). The gold mineralization is generally confined within the main fault area, which is continuous from surface to a depth of more than 500 metres vertically, including about 400 metres into hard rock (below the Saprolitic profile). The secondary corridor has been drilled with a spacing varying from 50 to 100 meters (see Figure 2). The geometry, orientation and continuity of the secondary corridor is still under evaluation, but appears to follow the same northwest trend as the main deposit, with a sub-vertical dip.

The Saramacca main deposit has been delineated for at least two kilometres along strike (as constrained within the current resource pit design), and only a 300 meters strike length has been investigated at depth for potential underground resources.

Next Steps

Based on the encouraging results, the Company will continue a surface delineation drilling program in 2019 to better define the Saramacca deposit at depth in an effort to increase the geological model definition and evaluate the potential for underground mining at Saramacca. The Company will use the results of the drilling programs to support a concept study to demonstrate the economic viability of a potential underground development.

Technical Information and Quality Control Notes

The drilling results contained in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects.

The "Qualified Person" responsible for the supervision of the preparation, verification and review of the technical information in this release is Raphael Dutaut, P.Geo., Manager Resources Geology for IAMGOLD. He is considered a "Qualified Person" for the purposes of National Instrument 43-101 with respect to the technical information being reported on and is responsible for the planning, supervision and execution of the diamond drilling program. The technical information has been included herein with the consent and prior review of the above noted Qualified Person.

The information in this news release was reviewed and approved by Craig MacDougall, P.Geo., Senior Vice President, Exploration for IAMGOLD. Mr. MacDougall is a Qualified Person as defined by National Instrument 43-101.

The sampling of, and assay data from, the drill core is monitored through the implementation of a quality assurance - quality control (QA-QC) program designed to follow industry best practice. Drill core (NQ size within mineralized envelop) samples are selected by the RGM-IAMGOLD geologists and sawn in half with a diamond saw at the project site. Half of the core is retained at the site for reference purposes. Sample intervals may vary from 60 centimeters to thee metres, with the vast majority being one and a half metres in length depending on the geological observations. Samples were stored in sealed plastic bags and packed into fiber backs onto a pallet where they were shrink wrapped for transport. A formal chain-of-custody procedure was adopted for security of samples until their delivery at the laboratory.

The internal RGM laboratory (the "Internal Laboratory") was used to complete the assay analyses. The Internal Laboratory (certification ISO/IEC 17025:2005) completed the following: Samples are coarse crushed to 75% passing 2.35 mm screen (8 mesh screen), riffle split (700 gram) and (mild steel) to 95% passing 88µm (170 mesh). Cleaner sand is included. Samples were analyzed using a standard 30 gram fire assay (30 g aliquot) with an Atomic Absorption (AA) finish. For samples that returned assay values over 0.3 grams per tonne (g/t), a second cut is taken from the original pulp and fire assayed a second time. IAMGOLD inserts blanks and certified reference standards in the sample sequence for quality control.

External checks are performed at Filab Suriname Laboratory ("Filab"), which is an ALS Limited representative in Suriname. Filab is a commercial certified laboratory (ISO 9001:2015) which is using a very similar procedure comprising the following: Samples are coarse crushed to 75% passing 2.35 mm screen (8 mesh screen), riffle split (700 gram) and pulverize to 85% passing 88µm (170 mesh). Cleaner sand included. Samples were analyzed using a standard 30 gram fire assay (30 g aliquot) with an Atomic Absorption (AA) finish. For samples that return assay values over 3.0 grams per tonne (g/t), another cut was taken from the original pulp and fire assayed with a gravimetric finish was performed. IAMGOLD inserts blanks and certified reference standards in the sample sequence for quality control. External QA-QC checks done since two years confirmed the reliability of the Internal Laboratory results, although the latest assays results were not yet sent for external checks.

Forward Looking Statement

This news release contains forward-looking statements. All statements, other than of historical fact, that address activities, events or developments that the Company believes, expects or anticipates will or may occur in the future (including, without limitation, statements regarding expected, estimated or planned gold production, cash costs, margin expansion, capital expenditures and exploration expenditures and statements regarding the estimation of mineral resources, exploration results, potential mineralization, potential mineral resources and mineral reserves) are forward-looking statements. Forward-looking statements are generally identifiable by use of the words "will", "should", "continue", "expect", "anticipate", "estimate", "believe", "intend", "to earn", "to have', "plan" or "project" or the negative of these words or other variations on these words or comparable terminology. Forward-looking statements are subject to a number of risks and uncertainties, many of which are beyond the Company's ability to control or predict, that may cause the actual results of the Company to differ materially from those discussed in the forward-looking statements. Factors that could cause actual results or events to differ materially from current expectations include, among other things, without limitation, failure to meet expected, estimated or planned gold production, cash costs, margin expansion, capital expenditures and exploration expenditures and failure to establish estimated mineral resources, the possibility that future exploration results will not be consistent with the Company's expectations, changes in world gold markets and other risks disclosed in IAMGOLD's most recent Form 40-F/Annual Information Form on file with the United States Securities and Exchange Commission and Canadian provincial securities regulatory authorities. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement.

About IAMGOLD

IAMGOLD (www.iamgold.com) is a mid-tier mining company with four operating gold mines on three continents. A solid base of strategic assets in North and South America and West Africa is complemented by development and exploration projects and continued assessment of accretive acquisition opportunities. IAMGOLD is in a strong financial position with extensive management and operational expertise.

For further information please contact:

Indi Gopinathan, Investor Relations Lead, IAMGOLD Corporation
Tel: (416) 360-4743 Mobile: (416) 388-6883

Martin Dumont, Senior Analyst Investor Relations, IAMGOLD Corporation
Tel: (416) 933-5783 Mobile: (647) 967-9942

Toll-free: 1-888-464-9999 info@iamgold.com

Please note:

This entire news release may be accessed via fax, e-mail, IAMGOLD's website at www.iamgold.com and through Newsfile's website at www.newsfilecorp.com. All material information on IAMGOLD can be found at www.sedar.com or at www.sec.gov.

Si vous désirez obtenir la version française de ce communiqué, veuillez consulter le http://www.iamgold.com/French/accueil/default.aspx.

Table 1 Saramacca Underground Mining Project Drilling Results - 2018-2019 Drilling Program
Hole No.UTM WGS84 Zone 21NAZDIPEOHFromToCore Interval (1)Au (2)

EastingNorthingElevation(°)(°)(m)(m)(m)(m)(g/t)
SMD-0066A678,519544,724209213-55651540.0559.519.53.08
Including (3)
552.0558.06.04.82
SMD-0067678,480544,752207213-55600514.5535.521.06.05
Including (3)
525.0535.510.59.72
SMD-0068678,519544,636215211-55552465.0484.519.55.62
SMD-0069678,552544,681210213-55600532.5552.520.05.77
Including (3)
546.0550.54.510.86
SMD-0070B678,601544,791176212-55801636.5639.53.02.70
SMD-0071B678,462544,767204212-57597525.0547.722.78.54
Including (3)
531.0540.09.015.23
SMD-0072678,578544,590209212-52501470.0472.92.92.39
SMD-0075678,420544,758206212-55552no significant results
SMD-0078678,616544,710194212-57702no significant results
SMD-0080B678,674544,860165212-60954727.5730.53.03.02
SMD-0083A678,619544,708194217-55750619.0622.03.03.32
SMD-0085678,543544,848171215-53762no significant results
SMD-0086678,477544,888167204-58744no significant results
SMD-0088678,521544,720209213-52576531.0547.516.52.05
SMD-0089A678,540544,618213213-52501442.5462.019.53.12
Including (3)
460.5462.01.515.50

 

Table 2 Saramacca Underground Mining Project Drilling Results - 2017-2018 Drilling Program
Hole No.UTM WGS84 Zone 21NAZDIPEOHFromToCore Interval (1)Au (2)

EastingNorthingElevation(°)(°)(m)(m)(m)(m)(g/t)
SMD-0004678,413544,661223215-55450349.5358.08.511.07
SMD-0005678,450544,625225215-51411366.5395.028.55.96
Including (3)
383.0392.09.08.38
SMD-0030678,408544,697220215-55453396.0406.510.54.09
SMD-0031678,526544,562213215-50402351.0360.09.03.06
SMDD17-213678,478544,616219215-50432360.5393.332.84.72
Including (3)
371.0381.510.57.47
SMDD17-227678,490544,708215215-50483460.5481.020.53.25
Including (3)
468.0472.04.06.29
SMDD17-255678,509544,567215215-50402348.5362.514.017.77
Including (3)
348.5350.01.5147.60

 

Table 3 Saramacca Underground Mining Project Drilling Results - Secondary Mineralized Zone
Hole No.UTM WGS84 Zone 21NAZDIPEOHFromToCore Interval (1)Au (2)

EastingNorthingElevation(°)(°)(m)(m)(m)(m)(g/t)
SMD-0079678,123545,25955215-50150113.2114.21.023.36
SMD-0081677,998545,24957215-5115079.584.04.57.85
SMD-0082678,011545,4485635-40150109.5114.04.519.99
Including (3)
109.5112.53.027.77
SMD-0090A677,885545,4599035-50165231.0237.06.010.19
Including (3)
231.0235.54.512.04
SMD-0091677,885545,4599035-5016560.067.57.52.54
SMD-0092677,945545,2116235-52249181.5183.01.5111.40
SMD-0093678,023545,1508835-50228178.3179.31.058.21
SMRC-0016678,035545,41553215-50150100.0110.010.03.09
SMRC-0008678,10054531055213-4815072.096.024.09.67
Including (3)
72.078.06.011.46
90.096.06.026.41
SMRC-0023677,994545,49662215-5015092.096.04.05.10
Including (3)
92.094.02.09.33
SMRC-0025678,147545,21678215-5015058.060.02.03.34
SMDD18-276677,992545,1946835-49204133.5135.01.59.76

 

Notes:

  1. Estimated true widths are approximately 65 to 90% of the Core Interval.
  2. Drill hole intercepts are calculated with a lower cut-off grade of 2.0 g/t Au.
  3. Assay intervals are reported uncut, but higher grade sub intervals are shown.
  4. Reverse Circulation (RC) holes from 2016 campaign.

Cannot view this image? Visit: https://orders.newsfilecorp.com/files/6077/46776_bafeed906445eae4_001.jpg

Figure 1: Saramacca - Underground potential drill hole long section and highlighted 2018-2019 assay results for the main Fault corridor.

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6077/46776_bafeed906445eae4_001full.jpg

Cannot view this image? Visit: https://orders.newsfilecorp.com/files/6077/46776_bafeed906445eae4_002.jpg

Figure 2: Saramacca - Underground potential drill hole long section and highlighted 2018-2019 assay results for secondary mineralized corridor.

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6077/46776_bafeed906445eae4_002full.jpg

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/46776

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.